Offline
I've been doing it about every 2-3 days for 4 months. I started with a 90mJ on the machine (.09mJ/cc2) on my machine and applied 2000 pulses to each side and 1000 to each crura. I've upped the strength to 130mJ (about .12 mJ/cc2) in the last month or so and have also begun to treat top and bottom rather than sides. The last 4 treatments I have done with an erection made with a penis pump.
Offline
Home therapy since June 2018
Varies but have settled on:
2 bar pressure
9 hz frequency
1000 pulses each side of shaft, 1000 pulses each crus
M, W, F for two weeks, six treatments total
Then rest for 20-60 days depending on my other activities.
This is similar to the professional treatment I received in early 2018.
Offline
Still Limppem wrote:
Then rest for 20-60 days depending on my other activities.
Do you notice any difference when you are resting from treatments?
Offline
I am going in to a holiday break. I will update you. I've never really paid any attention before.
Here is the state of the union before the break.
The dick is much more elastic than it was before any treatment.
It hangs naturally and "warm" No more George Costanza Greek statue shrunken dick.
It will thicken or "plump" spontaneously during the day. No way is it erect, but it is proof that it is alive.
I do not have any spontaneous erections or legitimate erection viewing porn
I have night erections every night.
Often they are very hard and persistent and must be "dealt with" either individually or as a group activity.
So much of bonerology is subjective and at least some of ED is in your head, so I haven't done much analysis until now.
Offline
I’m currently using the 25mm head with machine power set to 90 Mj and frequency at 10 Hz. I’ll do around 3000 shocks total per session with 1000 each side of shaft and 500 each side crus. I’ll do 2 or 3 sessions per week for 3 weeks then take a 6 to 8 week break.
After each session I always feel a bit tingly and also somewhat whipped but this usually goes away in a few hours or by the next day. Erection quality (EQ) sometimes suffers immediately after, but what I’ve discovered is that a significant positive effect begins 2 to 3 weeks after treatment has ended. I’ve come to believe it’s important to have this rest period after treatment to fully develop and experience these effects which do feel like increased blood flow, almost like inflamation, and then there are nocturnal erections with strong EQ, and also random erections during the day. Having said that, the effects seemed to settle down somewhat after about 6 weeks and so then I started another round of treatments at around 6 to 8 weeks.
After 2 iterations of this begining March 2018, the mild ED slowly became a thing of the past by August, so pretty happy about that. I just wrapped up my third 3 week treatment and looking forward to seeing where all this is going.
Offline
DZappa wrote:
Erection quality (EQ) sometimes suffers immediately after, but what I’ve discovered is that a significant positive effect begins 2 to 3 weeks after treatment has ended.
One thing I have not tried is giving it a rest, so your experience has convinced me to try that.
Offline
dicklimppen wrote:
DZappa wrote:
Erection quality (EQ) sometimes suffers immediately after, but what I’ve discovered is that a significant positive effect begins 2 to 3 weeks after treatment has ended.
One thing I have not tried is giving it a rest, so your experience has convinced me to try that.
I would encourage you to give that a try. I’ve also read about the delayed reaction in somewhere in my online research on treatments given in the UK. They were talking about growth factors appearing in blood samples at around the second or third week after treatment that continued to be present out to 8 weeks. I wonder if this is when angiogenesis is supposedly taking place?
Anyway, it’s pretty much like clockwork for me that the effects come in week 3. The first time it happened really caught me by surprise. After my first treatment, which was in a professional clinic, I had been on the fence about wether or not this whole thing really worked. But then afterwards during the third week I started getting these random tingling episodes which culminated in spontaneous erections. That’s what finally convinced me!
Offline
I have created a useful table to convert bar to mj/mm2 and mj to mj/mm2
How can I post a .pdf file or and excel file to this page?
Offline
I have the SW5F-ED. It has a number of pre-set "modes" (elbow, shoulder, ED, etc). It seems that, in the ED mode, the maximum power is limited to 30mJ. Most of the advice I have read indicates a power setting of around 90mJ. So, I generally go into elbow mode and select the following settings:
Frequency: 10 - 20 Hz
Power: 90mJ
The instructions are sparse so I am still trying to figure out the best procedure. The User Interface recommends the widest convex head for the ED treatment. However, the kit I bought also includes 3 additional hard rubber "covers" or adapters which, apparently, are specifically for the ED treatment cycle. (I cannot post links yet or I would post pictures). So, I am still experimenting. So far, so good I guess. More details to follow.
Offline
bonerboy wrote:
I have created a useful table to convert bar to mj/mm2 and mj to mj/mm2
How can I post a .pdf file or and excel file to this page?
I can't figure out how to post a pdf. A chart like that would be really helpful. Can you turn it into a jpg or png and post it as a picture?