1 of 1
Offline
Got this machine reviewed on dicklimppen's blog.
It's incapable of high energy and frequency of the bigger machines - maxed out at 105 MJ @ 12 Hz. Turned out that the higher energy setting of this machine is already a bit too much for me so that works out. I lost the link, but I read a research (with photographs) where they found effect with lower frequency to loosen up bone spurs. Maybe due to the larger (but fewer) cavitation created.
My problem is Peyronie's, soft head, and likely venous leak.
So similar to JChiwood I am starting with low and slow. Every other day for 6 sessions.
Energy / Frequency / # / Location
40MJ / 4Hz / 1000 / Corpus
60MJ / 6 Hz / 1000 / Corpus
70MJ*/ 6 Hz / 1000 / Crus & area
*tissues are deeper in this area so I gather higher energy is required.
As a bonus I shocked a few inches of area outside the crus towards my thigh, where veins were located.
I could feel a bit tenderness when the shocks are over where my Peyronie's is (and where higher energy became painful). And near the crus it felt like a good massage afterward (my inner thighs became more relaxed) which I took as working. The circulation was probably poor in that area.
Fingers crossed!
Last edited by JoeCanada (9/13/2019 2:27 pm)
Offline
Let us know what results you get JoeCanada
1 of 1